Doc's Shark Tank

[Doc]

Here are the rest of the pics:


I put more support beams between the corners and the middle section for extra support. they really seemed to make a difference



here is the back of the tank



I put two more supports in between the center of the stand and I will have two large doors on either side to get into the 90 gallon sump I just bought. (I have to go pick that up tonight.)


finished frame of the stand. YAY. So, does it look like it will support the weight of the tank? I sure hope so because I am about to finish it now and I will not be checking the forum until after I am done with it all.

I am also going to throw in a cross brace in the middle of the tank just to make sure it is stable from the center.

-Doc

[dustin_P74]

i think your fine doc. looks like an overbuild but you can never be to safe

[RyanG]

Doc how are you gonna get your 90 sump under that stand with all the extra braces on the back? I would eliminate them completely. if you still feel uncomfortable with the back being wide open double up the 2x4 header but its unnecessary

[Doc]

I am dropping the stand on top of the sump, which will sit flat on the carpet. I am not adding a bottom on the stand. It will just sit on the carpet. It just barely fits. The sump really fills up with room under the stand. Good question though. I did think of that one ahead of time

-Doc

[Doc]

OK, here are a few more pics of some finish work I have done. You can see the middle brace I put in. It REALLY makes a different in the stability.

I am using bead board to finish the front and I have some really cool molding to finish it up. I hope I can make it work. I am going to try tomorrow to finish it up. It is a cherry wood finish.







oh, and you got a bonus shot of my Pug, "Meathead"

-Doc

[Bifferwine]

Wow, you are so private, you won't even post a pic of your pug's face!

[Doc]

I am posting these pics twice, once here and on a different thread. I need info about what to do with this sump I just got. i have to clean it and it has two pre-drilled holes and I am not sure what to do with it. are the bulkheads for intake from the tank OR for return to the DT after filtration. Ideas?






I need some direction here. I want to get everything set up tomorrow. the tank already has one baffle siliconed in with space under the baffle.

-Doc

[Doc]

Originally Posted by Bifferwine

Wow, you are so private, you won't even post a pic of your pug's face!

I tried to get her to pose, but she just follows my lead!

-Doc

[daugherty]

Have you ever thought about using a sheet of plywood on the top of the frame like they do with acrylic tanks and just cut out the spots for all the pluming? but all the pics look great thats going to one hell of a system you are setting up

[Doc]

Originally Posted by daugherty

Have you ever thought about using a sheet of plywood on the top of the frame like they do with acrylic tanks and just cut out the spots for all the pluming? but all the pics look great thats going to one hell of a system you are setting up

No, I cannot see a benefit in that. Not to mention that seems to require exact measurements and I am really not good at that whole "exact" thing. thanks for the idea though.