Search results

  1. C

    Cyano Assistance Needed

    Are you still having this problem? If so here is how I cured the same problem in my tank. I would recommend doing as many of these steps as possible 1. water changes of 15 to 20% *WEEKLY* 2. adjust your skimmer so that the skimmer cup fills at least half way up every 2 to 3 days. (it may be...
  2. C

    Corals dying

    Sounds like you are doing everything right. Assuming the canister isn't causing any problems, you are cleaning it weekly after all, then the only think i can think of other than the passage of time is adding a skimmer. If you add a skimmer I would try and adjust it so it at least fills half the...
  3. C

    Corals dying

    I'm not sure how large a pinch is, or what food you are using, and unfortunately I'm not an expert on coral feeding (I usually don't directly feed mine at all), but if you are feeding your corals daily then you may be feeding them a lot more than necessary and it could definitely be contributing...
  4. C

    Corals dying

    Wow! That tank is awesome at algae growing. What, how much, and how often are you feeding?
  5. C

    Corals dying

    Sounds like your water change and canister cleaning schedule is good. Some things I can think of: Blasting the rocks: Also even if you aren't over-feeding now, the rocks could be releasing phosphate now into the water that they have been accumulating in the past. If so this will continue for...
  6. C

    Corals dying

    Sure no problem. So if I understand: 24 gallon tank. No nutrient export (out of the tank) other than water changes? Any skimmers, sumps, canisters, filters, or anything else attached to the tank? What is your water change amount and schedule now? Livestock: 1 clown, 1 blenny, 1 urchin, 2...
  7. C

    Think I’m over feeding

    I can't give any advice on feeding, but as for nipping something in the bud before it gets worse, I highly recommend water changes. I'm not sure how many or how much water you may be doing but if algae has started increasing I would consider doing a 20% water change weekly. I would also suggest...
  8. C

    Corals dying

    Okay I haven't been on in years, but I have started (inherited) my 2nd tank (90 gallon) last year, so I'll take a stab at this. I know it's been a month, so if you are still here and still have a tank set up, could you post a brief status report on where you are at with the tank?
  9. C

    Questions on setting up tank with a used wooden aquarium stand

    Thanks for the reply. The tank has been moved now and I re-used the stand. Everything seemed fine as far as I could tell when I looked over the stand after the tank had been moved off of it. I guess time will tell.
  10. C

    Questions on setting up tank with a used wooden aquarium stand

    In a few days I am planning on purchasing a neighbor's 90 gallon setup (fish, rocks, coral, sump, equipment, the whole running system) and get it moved a few doors down to my place. The person I am purchasing the setup from says that the stand is 2 years old and he "Thompson waterproofed it" and...
  11. C

    Yellow plate coral dying

    Thanks for the responses. I have a homemade LED light fixture consisting of 24 cree 3watt LEDs, I think 14 blue and 10 white run off a typhoon controller at about 70% mounted 2 to 3 inches off the water (no lenses to focus the light) and my water is 22 inches deep. I wish I had a light meter and...
  12. C

    Yellow plate coral dying

    A few months ago I purchased a 1" diameter yellow plate coral and put him on the sand bed. For the first few weeks or so he looked fine, but then he started not puffing up much (looked more like colored bone than fleshy coral). I went away for 2 weeks and left the fish auto feeder dropping some...
  13. C

    Help! Accidentally overdosed calc (the calc part of the ESV 2 part)

    Thank you for the advice. Its been 1 day and my corals look fine. I figured Alk swings were worse so I had the Alk doser on the Neptune Apex and the Calc on a cheap timer (ran out of outlets. probably going to pony up for an EB8 now). I did add a little baking soda water yesterday. I just...
  14. C

    Help! Accidentally overdosed calc (the calc part of the ESV 2 part)

    I noticed tonight that my timer was stuck on and overdosed calc into my 37 gallon reef tank. I estimate about 10oz of ESV calc solution ended up being added. I last measured Calc and Alk 2 days ago and they were 9.7 (before I added about 1/2 tsp of baking soda to raise it) and 400 for the calc...
  15. C

    question on using ESV bionic 2 part (or Alk in general)

    Thanks for the info. Glad to know it is normal. I measured today and am now 8.75 and 415 with my magnesium around 1320. I think I will wait a day or two and then measure and dose 7.5ml again (or maybe 5ml) as I am just starting to figure out what to dial in.
  16. C

    question on using ESV bionic 2 part (or Alk in general)

    My Alk was low a few weeks ago in my 37 gallon tank (I don't have my notes at the moment. I think it was 7) so I dosed baking soda to raise it back up to 9 (my calc was stable at 420). Yesterday I measured 8.15 for Alk and 393 for calc so I decided to start using 2 part. I added 7.5 ml calc to...
  17. C

    Problem with my candy cane?

    Thanks again for your response. I can confirm the candycane appears to be totally fine and happy. At night I can see the little sweepers sticking out. Pretty cool.
  18. C

    Problem with my candy cane?

    Yeah it looked like something was hanging off the pale ring around the mouth. I thought maybe it was losing tissue or bleaching or dying or something. The first day I had it the green color was fairly uniform and I only saw two small spots that looked pale. Today there was a whole pale ring...
  19. C

    Problem with my candy cane?

    I just got my first coral 2 days ago. Yesterday I noticed a tiny spot near the mouth where it looked pale. now an entire ring around the mouth looks pale. (polyp on top) Is this normal? Are my lights too high? Please help, I don't want to kill my first coral! I tested my parameters yesterday...
  20. C

    Cooling down my tank

    I'm flattered, you took me literally! :-) I have a plastic mesh screen I built (google for the BRS videos if you are interested), so since I was lazy I just have the fans laying on the screen. I have them connected to a power adaptor for a harddrive usb kit and I have the adaptor plugged in...
Back
Top