tank scratches

Discussion in 'Do It Yourself (DIY)' started by knuckles519, Jul 5, 2013.

  1. knuckles519

    knuckles519

    Joined:
    Jul 5, 2013
    Messages:
    9
    Likes Received:
    0
    Location:
    luton england
    So iv got a rio 180 ...got scratches on. See someone Here used 220 grit sand paper then cerium oxide. Iv used 240 I think anywais p240 must mean 250 grit?...yh so I used 240 then CO but the scratches the sand paper made wont come out...tanks empty..hoping some1 whose done there own scratch remooval can help ps im using a drill for the CO
     
    knuckles519, Jul 5, 2013
    #1
    1. Advertisements

  2. knuckles519

    emmett0122

    Joined:
    Aug 27, 2012
    Messages:
    1,118
    Likes Received:
    353
    Location:
    Liverpool, PA
    i would much finer on the sand paper like 600 to 1000 grit wet or dry use it wet then buff with polishing compound
     
    emmett0122, Jul 5, 2013
    #2
    1. Advertisements

  3. knuckles519

    knuckles519

    Joined:
    Jul 5, 2013
    Messages:
    9
    Likes Received:
    0
    Location:
    luton england
    Thanks for replying...will try that!!
     
    knuckles519, Jul 5, 2013
    #3
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.