HeavyHittah
LivingReefs is like home
what you guys think? and what glass thickness should i use(or acrylic)?
pratt you know what thickness to go with glass or acrylic?
ok i understand what you said about the bubble trap, but i do have a purple ball valve controlling flow to the fuge
oh i didn't realize this in the first post... but the feed line for the fuge section should come from off your return line. Otherwise your fuge is going to just get built up with junk over time. then your fuge slowly overflows back into the return section.
does that make sense?
Picture only shows 2 baffles after the skimmer section. I'd suggest 3 baffles for the bubble trap
so mainly switch the baffle postions, use 1/4in glass for the baffles, and feed my fuge fromthe return line. correct?