chuysvt
hi
i have a power head that would not stick to the glass any tips guy. it mini power jet powerhead.
powerhead problem
- Thread starter chuysvt
- Start date
marcah
Reef enthusiast
make sure the area you are putting it is cleaned well, if there is any algae or anything at all on the glass it wont stick and stay to it..
little_fish
Moderator
i would scrape the area you want to attach it to with a razor blade. However, the suction cups wont stay on there permanently. You will have to put them back from time to time.
chuysvt
hi
thanks guys..
ace37
Boom goes the Dynamite
Try to sell it and buy a hydor powerhead they have suction cups and a magnet so your powerhead cant pop off and destroy things
chuysvt
hi
i was thinking of glueing the power head to the glass.with some super glue...i like the power....i dont want to change it... it was cheap and it keeps my water moving very well..
little_fish
Moderator
dont glue it, that will ruin the glass, and if you have ever have to remove the powerhead to clean it (which you will) or have to move it, you are SOL
chuysvt
hi
I had glue the power head but a rock had fell on it and it came off.i got a raiser blaed.the glue came right out.
