scubasu
Reefing newb
depends on the question i suppose.
setting up RODI
- Thread starter scubasu
- Start date
project5k
Reef enthusiast
nope, i'm not scared of any question... ask away....
i just reserve the right to not answer if i so choose!
i just reserve the right to not answer if i so choose!
scubasu
Reefing newb
tell me about your pic. is it a trike or some kind of car. im into fast cars and bikes.
project5k
Reef enthusiast
well, its a 71 vw bug that i cut up, built a front end for, did the interior of, and ride while pulling a camper trailer, it has a 1600cc naturaly asperated basically stock(multi pin crank) and an aftermarket disk brake conversion kit. all 3 wheels are air ride and controllable from the drivers seat, you drive it kinda like a bike, throttle is right hand, but clutch is left foot, shifter is in stock location, and the driver is straddle of the hump, so that the shifter is between the drivers legs..
the original factory vw rear seat is still there, its the passenger seat now... its not super fast, but its super comfortable, car sterio head unit, aftermarked amps, 1-1/4" pro horn tweeters, 5-1/4 mids, and 12" whoofers, no subs...
it carries 10 gallons of fuel in the side tanks, gets something like 25mpg with the trailer and a passenger....
the front end is the 2 front fenders that i cut and welded together, and then put the headlight right in the hole where it went from the factory.. and that front end will lay all the way over till the paint scratches, so it can turn pretty well for something that is that long...
what else would you like to know?
the original factory vw rear seat is still there, its the passenger seat now... its not super fast, but its super comfortable, car sterio head unit, aftermarked amps, 1-1/4" pro horn tweeters, 5-1/4 mids, and 12" whoofers, no subs...
it carries 10 gallons of fuel in the side tanks, gets something like 25mpg with the trailer and a passenger....
the front end is the 2 front fenders that i cut and welded together, and then put the headlight right in the hole where it went from the factory.. and that front end will lay all the way over till the paint scratches, so it can turn pretty well for something that is that long...
what else would you like to know?
