Mega Powerful Nitrate and Phosphate Remover - DIY!

Interesting, Fast...
I guess running a bioreactor with a scrubber would be counter intuitive. The gains you'd make on the biopellets would probably eat away at the gains you had on the scrubber.

I think I'm going to sandwich another screen onto the current one for a more 3d growing surface.
 
I just cant seem to get any good growth on my screen. The setup is correct but I am getting slimy light brown to yellow stuff with a little green on the lower 1/3rd. Anyone have some thoughts?
 
Hmmm. Maybe I am being impatient. I did start the tank with dry rock and only 3.5 pounds of LR so maybe its going to take a little longer to get what I am looking for.
 
"Assessing Evidence of Phase Shifts from Coral to Macroalgal Dominance on Coral Reefs"
Ecological Society of America, June 2009
An Error Occurred Setting Your User Cookie

"Our database included 3,581 quantitative surveys of 1,851 coral reefs (or sites) performed between 1996 and 2006. Our analysis was based on quantitative surveys that measured the percentage of the substratum covered by living coral and fleshy or calcareous macroalgae between 1 and 15 meters depth."

[A simplified version of Table 1]

Caribbean -- Corals: 20%, Algae: 23%
Florida Keys -- Corals: 8%, Algae: 15%
Indo-Pacific -- Corals: 33%, Algae: 12%
Great Barrier Reef -- Corals: 31%, Algae: 9% "

"Overall, our results indicate that there is no general recent trend (i.e., post-1995) toward macroalgal dominance."

"Macroalgal cover on these 'pristine' reefs is similar to the regional averages for three of our four study regions, suggesting that macroalgal cover may currently be close to the historical baseline across most the world."

"Macroalgal cover and coral cover are widely assumed to be causally linked and inversely related. Yet we found only weak negative relationships between coral and macroalgal cover. Surprisingly, macroalgal cover has not increased appreciably on most of the world’s reefs that have very low coral cover. For example, 379 of the 1,851 reefs had less than 10% coral cover, but macroalgal cover was also low (less than 20%) on nearly two thirds of these reefs. In fact, more than half the benthic cover on reefs in the Caribbean, Pacific and Indian Oceans consists of organisms other than hard corals and macroalgae, possibly because other taxa, such as sponges and gorgonians, have been the primary beneficiaries of coral loss."
 
That's how myn was, and by the end of day 4 there was some brown and dark red growth. Now it's about day 3 after each cleaning it's all back. No green turf, but great nutrient export! My test readings on the 5th week are .1 phosphates and nitrates. Not exact but pretty low. However I am having small cyano outbreaks I have manually been removing.
 
My problem has been that on my 1-sided screen, the side without the light shining on it is the side growing the green hair algae! The side with the light is growing thick, yellow with brown stringy algae. What gives?
 
i've had my algae scrubber running six days now. this is what i got:

WP_002136.jpg


the perfectly vertical line going down the screen i am guessing is from where i enlarged (from 1/8" to 1/4") the slot in the pvc flow pipe in the first half of it on the end closest to the pump return as there was too much flow on the opposite end and i wanted to get more water out from the beginning to even things out.

is this good/normal in terms of the color? should i go ahead and make the entire slot 1/4" based on how that part of the screen is brown? or should i make a new pipe with 1/8" all the way?

are my lights too close and that's what it's brown? seems some folks needed to back off their lighting distance and others you suggested to run less hours and others you just said the scrubber will grow what it needs to grow.

thanks for the help!
 
Back
Top