Plumbing a 15 gallon

[UnderwaterWorld]

So I am trying to get my 15 gallon (24" long) plumbed asap so it can cycle and start maturing. I want to order the parts online so that I get exactly the right parts. I can't remember the site but I know there was a good one out there. I believe I have 1" bulkheads, if not I can adjust what ever you guys tell me I need to get the right parts. I want the tank to be plumbed to a sump/refugium below.
I already have two holes drilled w/ bulkheads

Thanks,
Matt

 

[daugherty]

http://glass-holes.com/product.sc?categoryId=3&productId=7

 

[UnderwaterWorld]

that's the site thanks, but I don't need most of that stuff, the holes are already drilled and the bulkheads are in.

 

[yote]

I think you'd be better off to just get your plumbing from your local hardware store.It'd save you some money,and you'll get what you need a whole quicker.

 

[UnderwaterWorld]

can you post what I'll need then, I've never done it before, that would be great

 

[yote]

All you'll need is roughly 15 feet of PVC pipe.What ever size fits your bulk heads.PVC glue and primer,union,and thread to slip adapters to hook onto your return pump.
I actually used the flex pipe that came with my pro-clear sump for most of my plumbing,just glued it onto the 1"PVC that empties into the sump.
Almost for got,Pick up 5 or 6 PVC 45*s.Its better to use 45s than 90s.