HeavyHittah
LivingReefs is like home
Hey yall,
First let me say thanx for stopping by and checking out my thread. Its been a very long time since i posted here but im back. My last tank i had on here was a Biocube 8. I took it down so i could move from Houston back home to Columbia,SC. In the process of modding it when i got back home, I Broke it. Being that i had no livestock in it (gave it away in Houston) and i got the tank for free, i wasnt too upset but it did hurt a little. Anyway i started a 10gallon build and here it is.
---------From my other thread at NR-------
After countless hours of looking through other builds and asking a whooole bunch of questions. i finally stepped into a big mass of LED funk. The whole point of me building this was to light a 10g frag tank and to get some experience with Leds. I would like to thank My Mom(lol), Evil, Andru24,waterproof, everybody who has their build listed on LED list, and everyone who answered any questions for me.
equipment list
6-CW xre
6-RB xpe
2-Buckpucks with Pots (700ma)
2-Protrans PS's
2-Plugs from my old BC8 hood
Misc.-BQ pads,solder(63/37),40w soldering iron from RShack, wirestrippers, 22awg wire,knobs,heatshrink etc
Well lets just get into it
here are some of the supplies
these are the CWs, disaster99 helped me get these a whiiiilllee back from china. he had an awesome hookup
these are the RBs XPEs
The 700ma Bucks
Got the BQ pads stuck on. Man everything looked straight and right up close, you back away from it and well...not too aweful lol
Leds Stuck on the BQ pads
Soldering 1 Chain
Both Chains getting soldered
Closer shot
Another
Both Protrans in a project box(7x5x3)
Another Shot
whites down low, need to adjust my knobs, but i might get rid of these idk yet
another shot
Blues down low
First let me say thanx for stopping by and checking out my thread. Its been a very long time since i posted here but im back. My last tank i had on here was a Biocube 8. I took it down so i could move from Houston back home to Columbia,SC. In the process of modding it when i got back home, I Broke it. Being that i had no livestock in it (gave it away in Houston) and i got the tank for free, i wasnt too upset but it did hurt a little. Anyway i started a 10gallon build and here it is.
---------From my other thread at NR-------
After countless hours of looking through other builds and asking a whooole bunch of questions. i finally stepped into a big mass of LED funk. The whole point of me building this was to light a 10g frag tank and to get some experience with Leds. I would like to thank My Mom(lol), Evil, Andru24,waterproof, everybody who has their build listed on LED list, and everyone who answered any questions for me.
equipment list
6-CW xre
6-RB xpe
2-Buckpucks with Pots (700ma)
2-Protrans PS's
2-Plugs from my old BC8 hood
Misc.-BQ pads,solder(63/37),40w soldering iron from RShack, wirestrippers, 22awg wire,knobs,heatshrink etc
Well lets just get into it
here are some of the supplies
these are the CWs, disaster99 helped me get these a whiiiilllee back from china. he had an awesome hookup
these are the RBs XPEs
The 700ma Bucks
Got the BQ pads stuck on. Man everything looked straight and right up close, you back away from it and well...not too aweful lol
Leds Stuck on the BQ pads
Soldering 1 Chain
Both Chains getting soldered
Closer shot
Another
Both Protrans in a project box(7x5x3)
Another Shot
whites down low, need to adjust my knobs, but i might get rid of these idk yet
another shot
Blues down low