phastroh
Do Not Listen To Me!!!
Ok so my tank is 76 Degrees - PH is 8.2 - Amonia Reading was .5PPM on the color chart.
I just am about 28 hours into my rock installation. I was told I would have about 4 days before I would need to check but I have all my stuff going and wanted to check.
Looking at my charts with a PH of 8.2 and temp of 76 I am sitting at about an 8.1% toxic ammonia so i then calculated it by doing the 1 x 8.1/100 = .08ppm
I am not sure if I calculated this correctly and I am double not sure if I should be changing any water.
Water is clear as a bell and life is all over the tank, huge porcelain crab and plenty snails and lots of things poking their tentacle out of the little volcanos on the rock.
TBS rocks
I just am about 28 hours into my rock installation. I was told I would have about 4 days before I would need to check but I have all my stuff going and wanted to check.
Looking at my charts with a PH of 8.2 and temp of 76 I am sitting at about an 8.1% toxic ammonia so i then calculated it by doing the 1 x 8.1/100 = .08ppm
I am not sure if I calculated this correctly and I am double not sure if I should be changing any water.
Water is clear as a bell and life is all over the tank, huge porcelain crab and plenty snails and lots of things poking their tentacle out of the little volcanos on the rock.
TBS rocks