Alright I'll go ahead with the start of the stand build
Materials needed, a box of deck screws preferably #10's and 2 1/2 in
you will need 10 equal length 2x4's of the preferable height you want your stand, I chose 40in. Note: 2x4's are sold in 8 10 12 and 14 ft lengths ask them for the appropriate size to minimize waste and also have them cut these for you.
you will need 8 2x6 boards these are sold in the same lengths as 2x4 for the dimensions you will need to take your tank length and then add 1/4 of an inch for some wiggle room. My tank was was 48 1/2 inches long and 18 1/2 in deep so I had my 2x6's cut to 48 3/4 and 18 3/4 in, you will need 4 boards ea of the dimensions of your tank, so 4 long one and 4 short ones.
A power drill will be needed. make sure when you buy deck screws you get a square head and a bit to match for the drill. This isnt required but it will make it easy to screw as square heads tend to lose grip less easy.