Kizmar
#derpface
What I thought were micro-bubbles in the tank might instead be tiny particles of the sand substrate being tossed into suspension from the current.
Would this mean my VorTechs are mounted too low (about 1/3 of the way down the tank) or have the speed set too high? I have the strength set to about half normally. I turned them way down to about 1/4 of their full potential to see what the deal is.
The troubleshooting continues. ;)
Would this mean my VorTechs are mounted too low (about 1/3 of the way down the tank) or have the speed set too high? I have the strength set to about half normally. I turned them way down to about 1/4 of their full potential to see what the deal is.
The troubleshooting continues. ;)